Non Corrosion Car Tyre Sealant And Inflator To Prevent Unexpected Leakage

Non Corrosion Car Tyre Sealant And Inflator To Prevent Unexpected Leakage

Sizes available: 125ml; 250ml;300ml; 450ml; 650ml

Repair your punctured tire with Rubber Patch

Non-toxic and odorless

Description:

I-Like Tire Sealer & Inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.

Directions:

1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.

Precautions:

1. It is just for emergency use. Repair your punctured tire with Rubber Patch at your earliest possibility.
2. Keep away from heat, flame, spark and other source of ignition.
3. Store in a cool, dry place (45℃); Avoid direct sunlight.
4. Do not clash, puncture, or incinerate the can.
5. Keep out of reach of children;

Package: